| Pleated Filters |
Classification |
Description |
| DP-g13een |
 |
- Classified U.L. Class 2 per U.L. Standard 900
- Moisture Resistant Beverage Board Frame
- 100% synthetic media
- 17.5 pleats per foot
- MERV-13
- May qualify as a Sustainable Component for LEED/Green Building Initiative
|
- Low Initial Resistance for Energy Savings
- Pleat Stabilizers
- 100% Adhesive Application
- Maintains full MERV-13 in ASHRAE 52.2-2007
- Heavy Duty Two Piece Beverage Board Frame
- Meets LEED Green Buildng Criteria for Minimum Efficiency
|
| X-treme Pleated Panel Filters |
 |
- MERV-7 (Mechanical)
- 100% Synthetic Media
- Self Supported
- Damage Resistant
- No Metal
- Fully Incinerable
|
- Boxed Pleat Tips
- Additional Frame to Media Contact Points
- Excellent Memory - No Pleat Deformation
- 100% Adhesive Application
- Two Piece Frame Construction
- Reinforced with Pleat Stabalizer Straps
|
| DP Pleated Filters |
 |
- 1", 2", 4" Thicknesses
- Die Cut Beverage Board
- 14.3 Pleats per Foot (2")
|
- Low Initial Resistance for Energy Savings
- Pleat Stabilizers
- Uniformed Pleat Shape
- 100% Adhesive Application
- Two Piece Frame Construction
|
| DP Max |
 |
- Same Construction as Standard Type DP
- 1", 2", 4", 6" Thicknesses
- 10 Pleats per Foot (2")
- MERV-8
|
- Low Initial Resistance for Energy Savings
- Pleat Stabilizers
- Uniformed Pleat Shape
- 100% Adhesive Application,
|
| PowerGuard |
 |
- 1", 2", 4' Thicknesses
- Die Cut Beverage Board
- Super Charged, Electrostatically Enhanced Media
- 14.3 Pleats per Foot (2")
- 35-40% Efficiency, MERV-11
|
- Needled Fibers Provide Higher Efficiency on Fine Particulate
- Pleat Stabilizers provide Uniformed Pleat Shape
- Side Access PowerGuard Filters Available
- Exceeds Current Industry Specifications for Prefilters
|
| DP4-SA - Side Access Filters |
 |
- Same Construction as Standard Type DP
- 4" Thicknesses
- 1" Header on Top and Bottom is Designed for Installation in Side Access Systems
- MERV-8
|
- Media - 100% nonwoven synthetic fibers. The pleats are formed with a rigid welded wire grid laminated to the air leaving side to increase pleat stability
|
| DP Class 1 |
 |
- Classified U.L. Class 1
- 1", 2", 4" Thicknesses
- Non-Flammable Die Cut Board Frame
- Ultrafine Fiberglass Media
- Availble with Standard DP and DP Max Pleat Counts
- 35-40% Efficiency
|
- Ultrafine microglass media with an expanded metal grid laminated to the air leaving side. A special fire retardant adhesive is used to seal the media pack inside the frame.
|
| DP-HT - High Temperature |
 |
- Operates up to 500°F
- 1", 2", 4", Thicknesses
- Aluminized Steel Frame
- Ultrafine Fiberglass Media
- Available with Standard DP & DP Max Pleat Counts
- 35-40% Efficiency
|
- Aluminized steel channel with a heavy duty expanded metal screen on the air leaving side to support the media pack in the frame.
- Ultrafine microglass fiber with a high temperature woven scrim backing on the air leaving side. The pleats are formed with an expanded metal grid.
|
| DP-65, DP-85, DP-95 High Efficiency |
 |
- 2", 4" Thicknesses
- Die Cut Beverage Board
- Ultrafine Fiberglass Media
- Three Efficiencies 50-55%, 75-80%, 80-85%
- DP-85, DP-95 Recommended for Low Velocity Applications
- 4" Thick DP-65 Provides Highest Efficency Available in a Pleated Filter Operating at 500 FPM (50-55%)
|
- Ultrafine microglass media with an expanded metal grid laminated to the air leaving side. A special fire retardant adhesive is used to seal the media pack inside the frame.
- For use where higher efficiency filtration is required. Recommended for systems
|
| Mist-Defier High Moisture Pleated Panel Filters |
 |
- Specifically Designed for High Moisture Conditions
- 2", 4" Thicknesses
- 100% Synthetic, Moisture Resistant Media
- Two Piece Beverage Board Frame
- Water Repellant Adhesive
- Expanded metal backing
- MERV-7
|
- Mist-Defier Filters are designed for use in sea coast installations, rooftop units or other applications where filters are exposed to sensible moisture.
|
