| Blower / Vacuum |
Classification |
Description |
 |
Miniature Filter Elements |
|
Blowers |
Temp (continuous): min -15° F ( -26° C) max 220° F (104° C) |
| Engines |
Filter change out differential: 10"-15" in. H2O above initial delta P |
| Pneumatic Conveying |
Pressure drop graphs available upon request |
| polyester media 99%+ at 5 Miron |
99%+ removal efficiency std: Paper = 2 micron, Polyester = 25 micron |
| Paper meida 99%+ At 2 micron |
Patented high grade filter element w/built-in vacuum tight gasket seal which creates a positive seal between housing hemispheres and a new seal with each element |
|
|
Polyester Elements (5 Micron), Up to 6600 SCFM (11220 m3/hr) |
|
Industrial Strength Replacement Polyester Media Elements 99%+ removal efficiency to 5 µm |
Reinforced with epoxy coated steel wire on both sides of cloth |
|
Washable - lukewarm water & mild detergent |
|
Dust loading capacity is increased 40 % - 50% with polyurethane prefilter |
|
Temp (continuous): min -15° F ( -26° C) max 220° F (104° C) |
|
Filter change out differential: 10"-15" in. H2O above initial delta P |
|
Optimal sealing surface & design |
|
Paper Elements (2 Micron), Up to 4705 SCFM (8000 m3/hr) |
|
Industrial Strength Replacement Paper Media Elements, 99%+ removal efficiency to 2 µm |
99%+ removal efficiency std: Polyester=5 micron, Paper=2 micron |
|
Heavy duty industrial strength paper surrounded by heavy gauge galvanized expanded metal |
|
Dust loading capacity is increased 40 % - 50% with polyurethane prefilter |
|
Temp (continuous): min -15° F ( -26° C) max 220° F (104° C) |
|
Filter change out differential: 10"-15" in. H2O above initial delta P |
 |
Sm. Vacuum Elements, 800 Series |
|
These are popular sizes of replacement elements commonly used on vacuum pumps worldwide. These are available in polyester and paper media |
99%+ removal efficiency std: Polyester=5 micron, Paper=2 micron |
|
Temp (continuous): min -15° F ( -26° C) max 220° F (104° C) |
|
Optimal sealing surface & design |
|
Filter change out differential: 10"-15" in. H2O above initial delta P |
|
|
Polyester - Washable - lukewarm water & mild detergent |
|
|
Polyester - Reinforced with epoxy coated steel wire on both sides of cloth |
|
Positive Displacement Blower Filter Elements, 32 Series |
|
Filter Elements commonly used in PD Blower packages. |
99%+ removal efficiency std: Polyester=5 micron, Paper=2 micron |
| These are available in polyester, paper and wire mesh media |
Temp (continuous): min -15° F ( -26° C) max 220° F (104° C) |
|
Filter change out differential: 10"-15" in. H2O above initial delta P |
|
Optimal sealing surface & design |
|
Polyester - Reinforced with epoxy coated steel wire on both sides of cloth |
|
Special Size Elements |
|
a wide range of filter elements that are commonly used |
Polyester - Reinforced with epoxy coated steel wire on both sides of cloth |
| in industrial applications. Contact FSI if you require an |
Paper - Heavy duty industrial strength paper surrounded by heavy gauge galvanized expanded metal |
| unique sized element |
Dust loading capacity is increased 40 % - 50% with polyurethane prefilter |
|
Temp (continuous): min -15° F ( -26° C) max 220° F (104° C) |
|
Filter change out differential: 10"-15" in H2O over initial delta P |
|
Optimal sealing surface & design |
|
|
99%+ removal efficiency std: Polyester=5 micron, Paper=2 micron |
